Hector BC Triple Lock Singing Rock Carabiner

The Singing Rock Hector BC Triple Lock carabiner is a large, pear-shaped HMS-type carabiner, which is especially recommended for use in climbing and working at height. It is a very suitable carabiner to use as a fixed connector in anchoring systems or straps.

This carabiner has a holding bar on the inside, which allows the carabiner to acquire the correct position. In this way, it is possible to avoid the cross load, and it is ensured that the work is carried out with the main axis. This internal clamping bar can be removed from the carabiner using a number 3 Allen key.

It is made of light aluminum alloy, hot forging (Hot Forging), and features an I-shaped (beam-shaped) construction. All this gives the carabiner, resistance while lightness, in short, a higher quality. Its resistance is further reinforced, thanks to its anodized finish.

As it is pear-shaped, the upper part has a wide support area, which, in addition to supporting the rope, makes it slide better and reduces wear on the carabiner. This pear-shaped carabiner design makes it very suitable for securing with a dynamic knot or other securing methods.

It has triple closure, which is a fairly secure automatic closure, since to open the carabiner it is necessary to perform three movements (turn, lower and push), thus avoiding that the rope rubbing can accidentally open it. < strong>

This carabiner has Keylock technology to prevent the rope from getting tangled in the carabiner, thus facilitating its handling and giving the system greater security.

To improve both traceability and inspection, Singing Rock's Hector BC Triple Lock carabiner has a single serial number.

With the closure open, it presents a resistance of 8 KN.

With the carabiner closed, it supports a load resistance of 30 KN at the top and a load resistance of 9 KN at the bottom.

The trigger opening is 26mm. This wide opening of the trigger makes it ideal to be used as a central carabiner in anchors.

The weight of this carabiner is 91 grams.

It is available in two colors: blue and black.

Complies with the regulations: EN 12275 (Mountaineering and climbing equipment. Carabiners. Safety requirements and test methods) and EN 362 (Personal protective equipment against falls from a height. Connectors).